This morning, I re-read the lengthy
Junghans 24/4610 High Tech Chrono thread. I was going to add another post to the effect that deluded German eBay seller
chribay77's example still remained unsold (he'd
re-listed it yet again two days ago, with the opening bid price 'reduced' to 349 Euros). But I decided not to bother.
Not that I needed another example myself, but I decided to run a worldwide eBay search on 'Junghans Chronograph' (excluding 'Max Bill' from the results), in case any more had been listed. There hadn't. The search result included a few examples of Junghans quartz chronographs based on the Citizen / Miyota Cal. 3510 and 3530 movement. Over the years I've stumbled across a number of them and had previously posted a couple in
the old forum's Citizen Cal. 35xx thread.
It shouldn't be any surprise, as we now know from browsing catalogue scans in
Junghans online archive, it appears that after their brief 2-year dalliance with the 7A38-powered 'High Tech', they carried on using Citizen / Miyota movements in their quartz analogue chronographs for a couple more years. These movements have similar functionality and were no doubt cheaper than Seiko's rebranded Cal. V906A. Indeed why would Junghans have wanted to use anything else ?
But it appears they did, because scrolling through those eBay search results, further down I found this !

It was listed by an Italian eBay seller at the beginning of June (some time after I'd run my last Junghans 'mega' worldwide search).
https://www.ebay.co.uk/itm/Orologio-Jun ... 3778622418

- Junghans-7Axx-Clone-Gold-Panda-eBay-June2021-Listing.png (216.51 KiB) Viewed 9439 times

- rsz_junghans-7axx-clone-gold-panda-ebay-june2021-1.jpg (244.18 KiB) Viewed 9420 times

- rsz_junghans-7axx-clone-gold-panda-ebay-june2021-3.jpg (243.79 KiB) Viewed 9420 times

- rsz_junghans-7axx-clone-gold-panda-ebay-june2021-2.jpg (244.89 KiB) Viewed 9420 times

- rsz_junghans-7axx-clone-gold-panda-ebay-june2021-8.jpg (244.54 KiB) Viewed 9420 times

- rsz_junghans-7axx-clone-gold-panda-ebay-june2021-9.jpg (245.1 KiB) Viewed 9420 times

- rsz_junghans-7axx-clone-gold-panda-ebay-june2021-10.jpg (244.17 KiB) Viewed 9420 times
It has that familiar 3 pushers with crown @ 8 o'clock layout and 60 (rather than 30) minute counting sub-dial, as seen in almost all these style 7Axx clones. The dial carries an accurate representation of the JUNGHANS
☆ logo, but perversely it has also 'SWISS MADE' printed at the bottom of the dial (rather than say 'Made in Germany'). Naturally, the movement is the familiar twin battery composite Chinese-made 'Swiss' affair, stamped ONE JEWEL on the centre bridge plate, seen in other 7Axx clones. The case-back is stamped with something vaguely resembling a Junghans model number. It reads: 071 13632. But it has too many digits and isn't either of the traditional Junghans formats, like 24/4610 or 024/4610.44.